How to Import Screen Recordings into Premiere Pro, Final Cut Pro, and DaVinci Resolve

Handing a screen recording to a timeline editor? Which export settings to use, what frame rate to set your timeline to, and how to avoid double compression.

Most screen recordings never need a second editor. But sometimes the clip is only one layer of a bigger project: a branded intro that lives in a Premiere template, a two-camera interview being cut in Final Cut Pro, a licensed music bed and a colorist working in DaVinci Resolve. In those cases the screen capture has to leave the app it was recorded in and land on somebody else’s timeline.

That handoff is where quality quietly disappears. Someone exports a 1080p MP4, drops it onto a timeline running at a different resolution and frame rate, adds a second round of H.264 compression on the way out, and then wonders why the text in the terminal window turned to mush. None of that is the editor’s fault — the damage was done in the export dialog.

Here is how to prepare a screen recording for a timeline editor so it arrives sharp, in sync, and easy to work with.

First, Decide What You Finish Where

Screen recordings carry a set of edits that only a screen-recording tool can do well: automatic zoom on the area you clicked, cursor smoothing and click highlights, a background with padding and rounded corners, a webcam overlay following the cursor. Recorded renders all of it directly into the exported frames.

That is the important part: those effects are baked in. Once the MP4 lands in Premiere, the zoom is part of the picture. You cannot slide a zoom two seconds later, change its easing, or soften a click highlight. Any layer you might want to revise later must stay in Recorded.

So split the work like this:

  • Finish in Recorded: trims, cuts, speed changes, zooms, cursor treatment, background and padding, webcam placement, text overlays tied to specific UI elements.
  • Leave for the editor: titles that match a brand template, music and sound design, multi-camera cuts, anything involving footage Recorded never saw.

The one caveat: if you are not sure the zoom timing is final, do not export yet. Re-exporting from Recorded is cheap. Un-baking a zoom is impossible.

Export MP4 at Original or Retina, Not Your Delivery Size

Recorded exports two formats: MP4 (H.264) and GIF. For a handoff, MP4 is the only sensible choice — GIF is a palette-quantized, audio-free delivery format, useful for a README or a Slack message and useless on a timeline. Our guide to choosing the right video format covers where each one belongs.

The setting that matters more than format is Resolution. The MP4 row offers 720p, 1080p, 1440p, 4K, Original, and Retina. Original is the recording’s logical size; Retina multiplies it by the capture scale factor, so it matches the physical pixels a Retina display actually captured — and it only appears when the recording has a higher-resolution variant to offer.

For a handoff, pick Original or Retina. The reason is resampling. Screen content is full of one-pixel lines, hinted text, and hard UI edges, and every resize blurs them a little. If you export at 1080p and your editor’s timeline is 1080p, that is one resize. If you export at 1080p and someone later crops in, scales up, or delivers at 1440p, you are stretching pixels that no longer exist.

Export once at native size, let the editor scale down at the end, and the picture only gets resampled on the trip it cannot avoid. The output dimensions appear right next to the Resolution label, so you can confirm exactly what you are about to render. The high-quality export feature page walks through what the pipeline does at each preset.

The tradeoff is file size and render time. A Retina export of a 4K-ish capture is a large file, and rendering takes roughly twice the length of the video. That is the correct price for a master file — see why exports take so long if the wait surprises you.

Turn Off “Optimize File Size” for a Handoff

Below the resolution row there is a toggle labeled Optimize File Size, which runs the finished MP4 through an extra compression pass and writes a second, smaller file alongside the original.

That is a great option for sharing and a bad one for a handoff. Compression is a one-way trip, and you are about to hand the file to an editor who will compress it again on export. Leave the toggle off and send the clean render. If you have already exported with it on, note that you get both files — the uncompressed one is still there, named without the _compressed suffix.

If file size is the real constraint — a 2 GB master will not fit in an email — send a link rather than a smaller file. Our post on reducing screen recording file size explains which reductions are free and which cost you picture quality.

Set the Timeline to 60 fps

Recorded renders MP4 at a constant 60 frames per second. This is the single most common cause of handoff weirdness, because editors do not resample frame rates silently — they just make a decision for you.

Create your sequence, project, or timeline at 60 fps and each recorded frame maps to exactly one timeline frame. Drop the same clip onto a 23.976 or 29.97 fps timeline and the editor has to throw frames away: smooth scrolling gets a slight judder, and fast cursor movement starts to strobe. It is not broken, but it is visibly worse than what you exported.

If the project frame rate is fixed by the rest of the footage — a 24 fps film project, a 30 fps broadcast deliverable — accept that the screen capture will be conformed and plan for it. Favor slower, deliberate cursor movement and avoid fast scrolls in the sections that matter, because those are the moments where dropped frames show. Our frame rate guide goes into which content survives a frame rate change and which does not.

Also check whether your editor interprets the clip as variable frame rate. A constant-frame-rate H.264 file should import cleanly, but some editors still prefer to conform the audio; if your editor reports a frame rate mismatch on import, let it conform rather than overriding, and verify sync at the end of the clip rather than the start.

Audio Arrives as One Mixed Track

While recording, Recorded keeps your sources separate: system audio goes to audio.wav, the microphone to mic_audio.wav, both in the recording’s folder. The editor timeline lets you set system and microphone volume independently per segment, and you can add background music from the built-in presets or your own file.

At export, all of that is mixed down into a single AAC track inside the MP4. There are no stems. If the voice is too quiet against the app’s notification sounds, your editor cannot fix it — the ratio is already printed into the file.

Two ways to handle that:

  1. Set the balance in Recorded first. Use the per-segment system and microphone volume controls, listen on headphones, and get the mix right before you export. This is the right answer for most handoffs.
  2. Send the raw audio as well. In your recordings list, use Open Folder on the recording to reveal its folder, and hand over audio.wav and mic_audio.wav alongside the MP4. Your editor can line them up against the mixed track and mix properly. Worth it when there is a real sound designer on the other end.

A related trap: the raw recording.mp4 sitting in that same folder is the untouched screen capture, and it has no audio and none of your edits — audio is kept in those separate WAV files, and the effects only exist in the export. It is tempting to grab it because it is the biggest file in the folder. Do not hand that over as your master.

Watch the Aspect Ratio Before You Export

A screen capture is whatever shape your display or selected area was: a 16:10 laptop panel, a 21:9 ultrawide, a window that happened to be 1512 points across. Timeline editors deal with the mismatch by either pillarboxing your clip or cropping it, and neither choice is made by you.

Decide the shape in Recorded instead. Crop to the target ratio in the editor, or use a background with padding to place an odd-shaped capture inside a standard 16:9 frame deliberately. How to crop a screen recording covers doing this without throwing away detail you need.

Tell whoever receives the file what the delivery frame is. “This is 16:9, fills the frame” saves a round trip. So does “this is 16:10 — put it on a background, do not crop the bottom,” because the bottom is often where the thing you were demonstrating lives.

Only Compress Once

Every H.264 encode throws away information. Two encodes throw away more than one, and the artifacts of the first pass become the detail the second pass tries to preserve, which is a waste of bitrate on noise.

The clean chain is: render once from Recorded at native resolution, edit, render once from your editor at delivery resolution. Two encodes total, and only the second one targets a small file.

The chain to avoid: export a compressed MP4 from Recorded, re-encode it in the editor to a new codec for editing, then re-encode again for delivery. Three generations of loss, and the first one was the avoidable one.

Make Scrubbing Bearable

H.264 is a delivery codec, not an editing codec. Each frame references the ones around it, so jumping backwards on a timeline means decoding a run of frames to show you one. On a long, high-resolution screen capture this is why scrubbing feels like wading.

Every major editor has a fix, and it is worth using before you blame the file:

  • DaVinci Resolve: generate optimized media for the clip, and leave the render cache on for sections with effects.
  • Premiere Pro: create proxies and toggle the proxy button while you cut.
  • Final Cut Pro: transcode to optimized (ProRes) or proxy media on import.

All three trade disk space for responsive playback and swap the full-quality file back in at render time. For a 10-minute Retina screen capture, that trade is strongly in your favor.

A Note on Exports Under the Free Plan

Exports shorter than 25 seconds work without an account, and they include a “by recorded.app” watermark in the top-right corner plus a short outro. That is fine for a quick share, but it is not what you want to hand to an editor — the watermark is rendered into the frames, so it cannot be removed downstream. Exports longer than 25 seconds require signing in with a Pro license, which also gives you clean, unbranded masters. If you are setting this up for the first time, start from the download page.

The Handoff Checklist

Before you send the file:

  • All zooms, cuts, speed changes, cursor effects, and overlays are final
  • Format: MP4
  • Resolution: Original or Retina
  • Optimize File Size: off
  • Per-segment system and microphone volume set, music level checked
  • Raw audio.wav / mic_audio.wav attached, if someone will remix
  • Aspect ratio and delivery frame communicated
  • Timeline frame rate agreed at 60 fps, or conforming accepted knowingly

And the question worth asking before any of it: does this video actually need another editor? If the only thing the timeline tool is adding is a title card and a music bed, Recorded already does text overlays and background music, and you can skip a whole generation of compression and a whole round of file wrangling. The handoff is worth doing well — it is also worth avoiding when nothing requires it.